 Buildings of Earth and Straw : Structural Design for Rammed Earth and Straw Bale Architecture Author(s): Bruce King Publisher: Chelsea Green ISBN: 0964471817
Order From
Oikos Bookstore Alternative Sources: Out On Bale By Mail Dirt Cheap Builder Amazon.com (links will open in a new window) Buildings of Earth and Straw : Structural Design for Rammed Earth and Straw Bale Architecture
Paperback, 169 pages
Publication date: April 1997
How-To Editor's Recommended Book: Chelsea Green's The Rammed Earth House and The Straw Bale House chronicle the possibilities and realities of straw bale and rammed earth construction. Buildings of Earth and Straw fills in the gaps for professional builders, contractors, engineers, inspectors, lenders, and architectural students. It includes special construction requirements of earth and straw, design capabilities and limitations of these materials, and documentation of testing data for use in addressing the concerns of officials. This book offers the nuts and bolts of rammed earth and straw bale building techniques, and why they are so spectacular, durable, and earth-friendly.
Table of Contents
Preface
Introduction
- Who Would Want to Read This Book, and Why?
- Earth and Straw: Natural Companions
- What We Will and Will Not Talk About
- A Footnote About Bamboo...
Part One: BASICS
- Abbreviations and Acronyms
- Glossary
- Structures and Forces
- Physical Forces That Act On Structures
- Some Other Variables
- Foundations
- Gravity Loads
- Lateral Loads
- In-plane Forces
- Out-of-plane Forces
- Earthquake Loads
- Other Lateral Force Systems
Part Two: EARTH
- The Material
- Stabilized Earth
- Rammed Earth
- Gunearth
- Stabilized Earth Mix Design--A Case Study
- density and chemistry tests
- compressive strength tests
- moisture exposure tests
- bond strength tests
- fastener tests
- admixture tests
- absorptivity tests
- erosion and wear resistance tests
- Analysis
- Design in Non-seismic Areas
- Design in Seismic Areas
- Foundations
- Bond Beams
- Lateral Loads
- Analysis Method
- Design and Construction Considerations
- Stabilized Earth
- Rammed Earth
- Gunearth
- Sample Calculations
- Case 1: Seismic zone 2B
- check h/t ratio
- axial compressive stress at top of footing
- Case 2: Seismic zone 4, wall cantilevered
- check h/t ratio
- horizontal earthquake load
- compressive bending stress
- shear stress
- tensile bending stress in reinforcing
- Case 3: Seismic zone 4, same wall restrained at top
- horizontal earthquake load
- design fc
- compressive bending stress
- shear stress
- tensile bending stress in reinforcing
- wall connection at top
- Conclusions
- Appendix E-1: Soil References
- Appendix E-2: Soil-cement References
- Appendix E-3: Sample Specification
Part Three: STRAW
- The Material
- Straw
- Bales
- Bale Variables
- Bale Wall Types
- Test Results--Straw Bale and Wall Properties
- Bou-Ali test, Tucson, Arizona
- SHB AGRA test, Albuquerque, New Mexico
- Ship Harbour Project test, Nova Scotia
- Fibrehouse Limited test, Ottawa,
Ontario
- Analysis
- Load-bearing Straw-bale Walls
- Gravity (Vertical) Loading
- Lateral Loading: Wind
- Lateral Loading: Earthquake
- Non-load-bearing Straw-bale Walls
- Design and Construction Considerations
- Bales and Pinning
- Wall Settling
- Moisture
- Fire
- Sample Calculations
- Case 1: Load-bearing Walls
- design for bale bearing and precompression
- check plaster skin in compression
- design for out-of-plane shear
- design for in-plane shear
- Case 2: Non-load-bearing Walls
- design for bale bearing and precompression
- design for out-of-plane shear
- design for in-plane shear
- Conclusions
- Appendix S-1: Straw Panels
- Pyramod International, Inc., City of Industry, California
- Stramit, U.S.A. L.L.C., Perryton, Texas
- BioFab, Redding, California
- Meadowood, Albany, Oregon
- Conclusions
- Appendix S-2: California Straw-bale Code
- References
- General
- Stabilized Earth
- Straw
- Seismic Zone Map of the United States
- Unit Conversion Tables
- Base Units
- SI Prefixes
- SI Derived Unites with Special Names
- Conversion Factors
Index
|